LOC Precision Flying Model Rocket Kit 1.63″ Hawk PFY-Hawk

LOC Precision Flying Model Rocket Kit 1.63″ Hawk PFY-HAWK The Hawk is one of many Park Flyer kits and an old Yank favorite!!! Designed to have the capability to be flown at ball diamond, large field, and anything in between. Includes a payload bay, 29mm motor mount and can be assembled in minutes! All Park Flyer series kits include Laser cut fins and fin slots. Recovery systems have elastic cord, parachute and fire resistant blanket. Instructions included. Skill Level: 3 Specifications: Length: 23 in. Diameter: 1.63 in. Weight: 9 oz. Recovery: 14″ Parachute Recommended Engines: 29mm D,E,F,G MMA-1 Motor Mount Adapter required to fly with 24mm motors Maximum apogee 2000ft Model Rocket Kits are rated by Skill Level 1 Beginner 2 Intermediate 3 Advanced 4 Expert 5 Master If you are just starting in the hobby start at the beginner level and move up from there at your own pace. What is needed to build and fly All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit. Additional supplies will be necessary to build and finish your model rocket kit and may include: Scissors, Hobby Knife Ruler Wood Glue, Model Cement or CA(Super Glue) Sandpaper Masking Tape Finishing Supplies like: Wood Filler Sealer/Primer Paint Launching Equipment and Supplies like: Recovery wadding Launch Pad Launch Controller Power supply Model Rocket Motors and Igniters A safe place to fly using guidelines from the National Association of Rocketry Safety Code